These are the end caps I made from poly clay. I am gonna glaze them so right now they are sitting and drying.
OOOOo look at that grain detail!! This is the needles all lubbed up with Tung oil. They are still a bit wet, but you can curtainly see the grain detail, especially in the oak (front).
Here is a full shot of them.
And a close up of the finished tips. Pretty damned good aye?! Now they need to dry for a couple hourse and then I will apply a second coat, let dry for an hour or so, wipe them down with a clean cloth, and let them dry overnight. Tomorrow, the caps get clued on and more pictures to come!
Until next time...